SDT200 Ultrasound Checker and Analyser
General | |
Input interface | 1 channel via 7 pole LEMO connector |
Built-in sensors | Ultrasonic airborne sensor Pyrometer sensor |
Display | Graphic LCD with backlighting (128 x 64 pixels) |
Measuring frequency range | Up to 100 kHz |
Signal amplification | From 0 to +90 dB by step of +10 dB |
Typical measuring range | -13 to +99.9 dB |
Raw sampling frequency | 256 ksps |
ADC Resolution | 16 bits |
Communication | USB Interface |
System features | |
Data logger | • 100 Measurement Nodes (measurement points) • Total 4000 Measurements (measurements data) |
Max acquisition time per recording | 10 seconds at 8 ksps |
Ultrasound measurement | |
Typical measuring range | from -10 dBµV to 109 dBµV using gain function |
Sampling rate | 8 ksps |
Temperature module (on-board) | |
Type | High precision non-contact infrared thermometer |
Measuring temperature range | -40 to +380 °C (-94 to +716 °F) |
Accuracy | ±0.5 °C |
TRITAN ENGINEERING SDN. BHD.
No. 28, Jalan Permas 9/13,
Bandar Baru Permas Jaya,
81750 Masai, Johor, Malaysia
Tel: +607-388 2010
Fax: +607-388 4316
Email: koh1@tritan.com.my
All Rights Reserved | Tritan Engineering Sdn. Bhd.